Hwa Young Co.
5 1

HYR 2-815 Series Pressure Regulator

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Quick Information

  • Place of Origin: Korea
  • Model Number : HYR 2-815 Series

Description

General Information

The HWA YOUNG HYR815-2 pressure regulator is designed for natural gas applications and feature a compapact, lightweight design for fast, easy installation with interchangeble drifices and springs that provide a wide range of outlet pressures and flow rates.
The HYR815-2 pressure regulator is tipically used in an industrial or commercial installation to minimize the shock effect of sudden downstream load changes that might otherwise activate safety shutoff equipment. IN such an installation,where gas consumpution varies from almost nothing to 608Nm3/hr.
Also,HYR815-2 provide a full range of regulators for service applications where accurate pressure control is required.
The units are ideal for industrial pressure reducing,metering stations and for district distribution.
The regulators are designed to maintain high accuracy and efficiency over the inlet pressure range 0.015~0.99MPa(0.15~10bar).
Several valve oriffices are available to cover the full inlet pressure range, together with a comprehensive numberof outlet pressure springs.
The unit has been designed for easy of installation and servicing in confined areas.The orifice, seat disc etc replacement and maintain are possible without disconnecting regulator body rom pipe.

Exclusive Several-step corrosion Protection

The protective finish on the series HYR815-2 regulator resist corrosive effects of weather and harsh environments better than any other in the industry.Each precision die cast aluminum regulator is treated inside and out with a special conversion coating that is part of an exclusive,six step finishing process. This coating greatly inhibits oxidation of the metal's surface that can enventually compromise the integrity of the metal.

Proven Safety devices

HYR-815 regulator have a internal relief and OPSO sefety devices to meet the demands of overpressure protection requirments.
These devices are operated in case of overpressure.

* INTERNAL RELIEF
HYR815-2 regulator have relief across the diaphragm to help minimize overpressure.
Any outlet pressure above the start-to-discharge point of the nonadjustable relief spring moves the diaphragm off the relief seat,allowing excess pressure to bleed out through the screened stabilizer vent.
For  extraprotection,should emergency conditions exist which prevent nomal operation of the regulator(for example,linkage becoing disconnected or disk broken off),the relief stem contacts the underside of the closing cap, limiting the rise of the relief. Since the diaphragm continues to rise  as downstream pressure builds,it lifts off the relief,thereby opening the valve to provide relief operation.

* OPSO
The OPSO built inregulator will shut off the gas supply in the event of a serious downstream pressure build up.

Application

  1. HYR 2-815 Series Regulator is designed for to use commercial place such as restaurant business, hotel, school, public building or factory etc to supply natural gas.
  2. It is suit for boiler or burning equipment device, small & medium device regulator.

Character

  1. It is easy to install (verticality and horizontality connecting pipe, Case rotate attachment)
  2. Can choice proper orifice according to first stage pressure and capacity.
  3. Orifice, Seat disc etc replacement and maintain is possible without disconnecting regulator body to pipe system.

General Specifications

Inlet Pressure Range
2~143psi
Outlet Pressure Range
0.23~6.4psi(160~4500mmH2O)
Relief Valve Pressure
0.45~9.5psi(320~6700mmH2O)
OPSO Operation Pressure
0.42~9.95psi(300~7000mmH2O)
Max. Capacity
Refer to Detailed Specification(8Page)
Connection Size
50A-10K Flange(RF Type)
Type
Composition
HYR 2-815
Built-in relief valve,
OPSO
HYR 2-815 OPSO
OPSO

Detailed

* S:Set point / P:Outlet Pressure / R:Range

Capacity Table

HYR 2-815 Series Pressure Regulator Capacity is indicating inlet pressure changing and capacity fluctuation according to orifice size. (gravity=0.6, standard state Nã?¥/hr)

Standard Flow Performance Curve

HYR 2-815 Series Pressure Regulator Construction

Spring

Adjusting Spring
Spring No.
Setting
Pressure
Range
Color
Ms 2815
0.23~0.37psi
Green
Ms 2815-15
1.45~2.61psi
White
Ms 2815-25
2.32~4.35psi
Blue
Ms 2815-40
4.06~6.4psi
Yellow
 
OPSO Spring
Spring No.
Setting
Pressure
Range
Color
Os81
0.43~0.69psi
Green
Os81-15
2.90~3.91psi
White
Os81-25
4.78~6.52psi
Blue
Os81-40
7.54~10.15psi
Yellow
     
Relief Valve Spring
Spring No.
Setting
Pressure
Range
Color
Rs 215
P2 + 0.17~0.40psi
Green
Rs 215-15
P2 + 0.58~1.30psi
White
Rs 215-25
P2 + 1.45~2.17psi
Blue
Rs 215-40
P2 + 1.74~3.91psi
Yellow
   


Product Image

  • HYR 2-815 Series Pressure Regulator image

Other products from this supplier

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Eulhong, SON
Hwa Young Co.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Pressure Regulators
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.